Blendtec Q-SERIES User Manual download pdf (Page 9)

CLEANING OF THE JAR

• Put 1L of hot water and .25ml of detergent (kitchen detergent etc.) in the jar.

• Close the lid of the jar tightly. Put the jar on the motor and push the P-button

(Pulse-button) for about 15 seconds.

• Clean the detergent on the jar and the cover with clean water.

• Do not use the dish sponge when cleaning the detergent. Use a soft piece of

dishcloth or ordinary cloth to wipe out the detergent.

CAUTIONS FOR THE USAGE OF THE DISHWASHER

• When using the dishwasher to clean the jar, put the jar in the top part.

• You can use the jar of the blender in the dishwasher with the maximum

temperature of 104 Celsius degrees (or 220 Fahrenheit degrees).

Do not keep the jar of the blender for more than ﬁve minutes under the water.

(When the bearing part of the jar is continuously contacted with water, its

lifecycle can be reduced.)

62. CLEANING OF THE MOTOR OF THE BLENDER QSERIES

INCOUNTER BLENDERS ICB

1. Make sure the main power switch is off and motor is unplugged before

cleaning.

2. When necessary, wipe the metal top and sides of the blender base clean

with a damp rag. Mild cleaners like WINDEX® may be used.

3. Remove the rubber gasket and clean as necessary.

4. If needed, the drive socket can be cleaned using a toothpick or cotton swab.

CLEANING TIPS AND CAUTIONS

• Do not use abrasives or stiff brushes to clean the blender base, jar, or sound

enclosure as this will dull or scratch the surface.

• Do not use a water jet of any kind to clean the blender base.

• NEVER submerge the blender motor in water—THIS WILL VOID WARRANTY.

7. WARRANTY & TROUBLE SHOOTING

71. WARRANTY

• Warranty for the Motor

ABC 1 year or 20000 cycles

Q-Series 1 year or 15000 cycles

SpaceSaver 1 year or 10000 cycles

[The one which comes earlier between the period of 1 year and the number of

15000 cycles (in case of Q-Series) according to the purchasing or selling date

is used.]

• WARRANTY FOR THE JAR: The following warranty conditions are applied

for the breakdown of the jar and the internal bearings.

(The model number of the jar is under the NSF logo of the jar.)

• BLADE: The stainless-steel blade is subject to the warranty when it is broken

during the lifecycle of the jar. As it is used over and over, the blade can

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Blendtec Q-SERIES User Manual Page 9